ADJ ENCORE BURST 200

ADJ ENCORE BURST 200ADJ ENCORE BURST 200The Encore Burst 200 is an IPX4 rated, high intensity dual lens audience blinder/strobe. It’s powered by two 110W warm white (2700K) CREE COB LEDs. The fixture is constructed with a rugged metal housing and an aluminum extrusion rails system to connect multiple fixtures to create a larger cluster of fixtures in a vertical or horizontal array. The fixture features a Tungsten Mode effect that replicates a halogen-like dimming profile.The Encore Burst 200 has selectable dimming curves, strobe effect, manual tilt adjustment of lenses, 4-button LED menu system, True 1 powerCON and a 50-degree beam angle.Light Source:2x 110W Warm White CREE COB (Chip On Board) LEDs2,700K Color Temperature (1,200K Tungsten Mode)50-degree Beam AngleCRI: 8112249 LUX @ 1M; 490 LUX @ 5M50,000 Hour Average LED LifeFeatures:Modular design to connect multiple fixtures together in a vertical or horizontal tray from a built-in rail system on the fixturesDMX Modes: 6Dimming Curve Modes: 6Dimming: 0 – 100% each modulePixel ControlStrobe EffectAdjustable LED Refresh Rate (900-25,000Hz)Adjustable Gamma Brightness (2.0-2.8)With Wired Digital Communication NetworkConnections:Data Input: 5pin DMX In/OutPower Input: Locking Power Cable In/Out (with protective rubber caps)Safety Cable LoopControl:RDM (Remote Device Management)Electrical:100-240V 50Hz/60Hz (Auto Sensing)Power Linking: 4 Fixtures @120V | 8 Fixtures @240VMax Power Consumption: 235W IPX4 Rated:X (Protection against Dust) Fixture is not tested for dust ingress. 4 (Protection against Water) Fixture offers protection from a splash of water in any directionMás Productos ADJ